SS2 Series Load Cell

SS2 & SS3 Ultra Low Force Tension and Compression 30g and 60g

Overview

The SS2 & SS3 load cells have been designed for applications where precision measurement of extremely low forces is required. They are based upon bonded semiconductor strain gauge technology, conferring excellent sensitivity and eliminating the fragility associated with unbonded strain gauge types. The design features excellent immunity to the effects of eccentric loading, side loading and bending moments. Forces may be applied either in tension or compression and alternative loading adaptors are available. The low deflection and consequent high-frequency response ensure that the unit is suitable for measuring peak and transient forces.

SS2 & SS3 Ultra Low Force Tension and Compression 30g and 60g

Additional information

Load Range

-60g, +/- 30g
Load Cell Type

Bi-directional, Compression
Use

Compression, Tension

Features

The SS2/SS3 load cells have been designed for applications where precision measurement of extremely low forces is required.

 

Specification & Dimensions

Type No SS2 SS3
Standard Range grams ± 30 60
Operational Mode Bi-directional Compression
Recommended Excitation Voltage VDC 5
Maximum Excitation Voltage VDC 10
Full Scale Output mV/Volt (nominal) 6 12
Combined Error ± % Full Scale (max) ±0.50
Operating Temperature Range °C ‑20 to +90
Compensated Temperature Range °C ‑10 to +65
Thermal Zero Shift ± % Full Scale/°C (max) 0.02
Thermal Sensitivity Shift ± % Reading/°C (max) 0.02
Input Resistance Ω (nominal) 650
Output Resistance Ω (nominal) 400
Overload Capacity (compression) % Full Scale 500
Maximum Side Load % Full Scale 100
Deflection at Rated Load mm (inches)(max) 0.05 (0.002”)
Environmental protection level IEC529 IP51
Documentation Individual calibration data sheet

 

Model

  • SS2 Ultra Low Force Tension and Compression 30g
  • SS3 Ultra Low Force Compression Load Cell 60g

Download

Data sheet SS2-3 – Iss 4

Accessories

  • DTI
  • Signal conditioner

Sales and Queries

  • This field is for validation purposes and should be left unchanged.

Related Products