DSIC-1 & DSIC-2 Series Inclinometers

Single axis or Dual axis DSIC with 5, 15 or 60 degree angular range

The DSIC Series is a range of single and dual axis gravity referenced digital output servo inclinometers with total error band of less than 0.08 degrees over -20°C to +70°C. Suitable for use in a variety of industrial applications where high precision angular measurements are required, and in rugged and robust applications where high levels of vibration and mechanical shock up to 1250g may be encountered.

Models are available in a variety of angular ranges from +/-5° to +/-60° with RS485 ASCII outputs and electrical terminations are via a connector.


Sherborne Sensors DSIC-1-OPZ
DSIC-1 & DSIC-2 Series Inclinometers
DSIC-1 & DSIC-2 Series Inclinometers
DSIC-1 & DSIC-2 Series Inclinometers
Axis1, 2
Resolution (Degrees)0.001°
Degree±5°, ±15°, ± 30°
Frequency response (Hz)20
Sensor Output TypeDigital
Output DetailsRS485 (ASCII)
Operating Temperature Range °C-20 to +70
IP RatingIP65
  • Resolution 0.001°
  • Total accuracy < 0.08° over -20°C to +70°C
  • Mechanical shock 1,000g 0.5ms half sine
  • Industry-standard RS485 output
  • 19-bit analog to digital conversion
  • 9 to 18 or 18 to 36 VDC unregulated supply options
  • Closed loop servo inclinometer sensing element
  • Dynamic filtering, allowing fast response with high vibration rejection
  • Built-in temperature sensing and active compensation
  • User-configurable output bandwidth
  • Wide range of bus speeds supported
  • Non-volatile configuration memory
  • Ordnance Aiming Systems
  • Rail track monitoring
  • Optical sighting equipment
  • Seismic and civil engineering analysis
  • Precision platform level control
  • Electrical Cable (1m to 60m)
  • DTI
  • Power Supply
  • DSIC Base Station
  • Mating Connector

Request a Quote

Request a quote by selecting your required options. A member of our team will be in touch soon with more information.

Single axis or Dual axis DSIC with 5, 15 or 60 degree angular range

Clear

Related Products