DSIC Single and Dual Axis Rugged Digital Servo Inclinometer

Inclinometer - DSIC Single and Dual Axis Rugged Digital Servo
Inclinometer - DSIC Single and Dual Axis Rugged Digital Servo
Inclinometer - DSIC Single and Dual Axis Rugged Digital Servo
Inclinometer - DSIC Single and Dual Axis Rugged Digital Servo
  • Inclinometer - DSIC Single and Dual Axis Rugged Digital Servo
  • Inclinometer - DSIC Single and Dual Axis Rugged Digital Servo
  • Inclinometer - DSIC Single and Dual Axis Rugged Digital Servo
  • Inclinometer - DSIC Single and Dual Axis Rugged Digital Servo

Overview

The DSIC Series is a range of single and dual axis gravity referenced digital output servo inclinometers with total error band of less than 0.08 degrees over -20°C to +70°C. They are suitable for use in a wide variety of industrial and military applications where high precision angular measurements are required in rugged and robust applications where high levels of vibration and mechanical shock up to 1250g may be encountered. Models are available in a variety of angular ranges from +/-5° to +/-60° with RS485 ASCII outputs and electrical terminations are via a connector.

Features

  • Resolution 0.001°
  • Total accuracy < 0.08° over -20°C to +70°C
  • Mechanical shock 1,000g 0.5ms half sine
  • Industry-standard RS485 output
  • 19-bit analog to digital conversion
  • 9 to 18 or 18 to 36 VDC unregulated supply options
  • Closed loop servo inclinometer sensing element
  • Dynamic filtering, allowing fast response with high vibration rejection
  • Built-in temperature sensing and active compensation
  • User-configurable output bandwidth
  • Wide range of bus speeds supported
  • Non-volatile configuration memory 

Applications

  • Ordnance Aiming Systems
  • Rail track monitoring
  • Optical sighting equipment
  • Seismic and civil engineering analysis
  • Precision platform level control

Downloads

Data Sheet

Related Products






Custom Products


Standard Product Finder